Acma; Rohs; Other Approvals - Siemens RUGGEDCOM RX1501 Installation Manual

Certification
6.1.7 ACMA
6.1.7

ACMA

This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
•
•
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-
port at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.8

RoHS

This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
try.siemens.com/cs/ww/en/view/109738831.
6.1.9

Other Approvals

This device meets the requirements of the following additional standards:
•
•
54
Radiocommunications (Compliance Labelling – Devices) Notice 2014 made un-
der Section 182 of the Radiocommunications Act 1992
Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
Radiocommunications (Compliance Labelling – Electromagnetic Radiation) No-
tice 2003 made under Section 182 of the Radiocommunications Act 1992
Telecommunications Labelling (Customer Equipment and Customer Cabling) No-
tice 2001 made under Section 407 of the Telecommunication Act 1997
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
https://support.indus-
RUGGEDCOM RX1501
Installation Manual, 05/2020, C79000-G8976-1054-17