Removing The Front Panel - Dell Dimension XPS Manual

Hide thumbs Also See for Dimension XPS:
Table of Contents

Advertisement

Documentation
1. Slide the power supply cables through the hole into the computer.
2. Insert the power-supply securing tabs into the power-supply securing slots on the computer, ensuring that each
securing tab is connected to its slot on the computer.
3. Slide the power supply toward the front of the computer.
4. Install the card fan guide:
a. Place the card fan guide into the four securing slots in the computer.
b. Slide the card fan guide to the left until it locks into position.
5. Connect the power supply cables and the card fan cable.
6. Replace the card fan.
7.
Install the card.
8.
and restart the computer.
Close the computer cover
Front Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in your
Owner's Manual.

Removing the Front Panel

1. Follow the instructions in
2.
Open the computer cover.
3. Disconnect and remove all disk drives (see "Drives").
4. Release the front panel by pressing each of the front-panel release tabs.
There are seven release tabs.
http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (30 of 37) [3/26/2008 3:57:09 PM]
"Before You
Begin."

Advertisement

Table of Contents
loading

Table of Contents