Documentation
4. Press inward on the two tabs on the sides of the drive, and then slide the drive upward and remove it from the drive
bay.
Installing a CD/DVD Drive
1. Follow the instructions in
2.
Open the computer cover.
3. If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are
installing an IDE drive, configure the drive for the cable select setting.
http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (18 of 37) [3/26/2008 3:57:09 PM]
"Before You
Begin."