Documentation
1
sliding plate
Installing a CD/DVD Drive
1. Follow the procedures in
2. Remove the computer cover (see
3. If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer.
4. If you are installing a new drive, remove the drive panel insert (see
shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (43 of 68) [12/9/2007 11:22:24 PM]
2
Before You
Begin.
Removing the Computer
Cover).
CD drive
Insert). Then, remove three
Removing the Drive-Panel