Changing Boot Sequence For Future Boots; Clearing Forgotten Passwords - Dell Dimension 9200 Service Manual

Documentation
For example, if you are booting to a USB memory key, highlight USB Device and press <Enter>.
NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the
device documentation.

Changing Boot Sequence for Future Boots

1. Enter system setup (see
2. Use the arrow keys to highlight the Boot Sequence menu option, then press <Enter> to access the menu.
NOTE: Write down your current boot sequence in case you want to restore it.
3. Press the up- and down-arrow keys to move through the list of devices.
4. Press the spacebar to enable or disable a device. Enabled devices have a number assigned to them; disabled devices
have no number assigned.
5. Press <U> or <D> to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1. Follow the procedures in
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/syssetup.htm (8 of 11) [12/9/2007 11:19:53 PM]
Entering System Setup).
Before Working Inside Your Computer.