Dell Dimension 9200 Service Manual page 80

Documentation
2. Follow the procedures in
3. Remove the computer cover (see
4. Press in on the tabs on each side of the hard drive bracket in the empty drive bay and slide the bracket up and out.
5. Snap the hard drive bracket onto the new hard drive.
Do not install any drive into the lower hard-drive bay until you have removed the hard drive bracket from
NOTICE:
the inside of the hard drive bay.
6. Slide the new hard drive into empty bay until you feel a click.
1 hard drive
7. Connect the power and hard drive cables to the drive. Refer to
cable connectors on the system board.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (33 of 68) [12/9/2007 11:22:24 PM]
Before You Begin.
Removing the Computer Cover).
2 hard drive bracket
to identify the hard drive
General Installation Guidelines