Dell Dimension 9200 Service Manual page 65

Documentation
1 release tab 2 card retention mechanism
NOTE: If your computer includes a card retention mechanism consider pivoting it out of the way to gain easier access
to the PCI card slots. Press the release tab downward gently and then pivot the mechanism upward.
4. If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with
5. If you are replacing a card that is already installed in the computer, remove the existing card.
If necessary, disconnect any cables connected to the card. If your card includes a retention mechanism, remove the top
of the retention mechanism by pressing the tab and pulling up on the top.
6. Pull the securing tab, grasp the card by its top corners, and then ease it out of its connector.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (18 of 68) [12/9/2007 11:22:24 PM]
3 card retention door
step 7.