Removing The I/O Panel - Dell Dimension 9200 Service Manual

Documentation
1 USB port 2
4 microphone connector 5

Removing the I/O Panel

1. Follow the procedures in
2. Remove the computer cover (see
3. If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently
and then pivot the mechanism upward.
4. Unhook the floppy drive cable from clips on processor shroud and move it out of the way.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (56 of 68) [12/9/2007 11:22:24 PM]
diagnostic, hard drive activity,
and network lights
thermal sensor connector
Before You Begin.
Removing the Computer Cover).
3 headphones connector
6 Integrated audio connector with
jumper block installed