Safety Precautions Please follow these instructions Important information is written on the product and in this instruction manual about how to use the product safely and correctly to avoid damage to property or injury to people using the product or to other people. You should fully understand these precautions (symbols and icons) and follow the instructions here before reading the main part of this manual.
Page 3
To avoid a fire, electric shocks, burns, injuries, or other problems Power cord and power plug Do not damage, sharply bend, stretch, twist, bundle, pinch, modify, or place heavy objects on the power cord. Do not use the power cord or power plug (power supply side or stand side) if it is damaged or if the power plug is loose when plugged into the electrical outlet.
Page 4
Attention To avoid malfunction or breakage to the iron Do not apply too much force to the handle. Do not iron hard things, such as buttons or fasteners. It may cause breakage. It may cause damage. Do not touch the soleplate against the surface of the Do not pour water on the surface of the stand or the stand or the case.
Page 5
Getting ready to use the iron Remove the case Put water (add more water) Turn on the power Hold the open buttons on both If you are using the iron for dry ironing, you do not sides of the case, pull them both Plug the stand side power plug outward ( ) as the arrows show,...
Names and functions of parts Contacts Soleplate Stand Iron Steam vents Contacts (52 vents) Contact pins Stand surface Controls Lock button Case Handle Handle of the iron's case Soleplate (FVW100: Nickel boron coating) Iron (FVW90: Silver titanium diamond coating) Cover Antibacterial glass and platinum ball FVW100:Antibacterial glass and platinum ball...
Page 7
Functions Functions of the FVW100. Mist outlet Steam / Dry lever Fill opening Steam (select from 2 types of steam) Lid of the fill opening Steam Shower Steam Mist button Press this button to spray mist. Shot button Press the button to do Ultra shots and Hanger shots. (Set the temperature to [HIGH] to use this.) Temperature lamp When the temperature is correct, the temperature lamp...
Page 8
How to use the iron Steam ironing Temperature settings Steam Press the SET / OFF button to set the temperature according to the fabric you are ironing. The temperature lamp flashes. (See page 7) According to fabric Shower Steam, Ultra shot, and Hanger shot ...
Page 9
How to use ultra shot and hanger shot You can do shots when the Steam / Dry lever is in the Dry, Steam, or Shower position. We recommend regular ironing to remove the wrinkles from cotton and linen. Wrinkles may be difficult to remove, depending on the amount of wrinkles, thickness and kind of the fiber. You can remove wrinkles from woolen clothes You can use an ultra shot vertically.
Page 10
How to use the iron Dry ironing Temperature settings Press the SET / OFF button to set the temperature according to the fabric you are ironing. The temperature lamp flashes. (See page 7) According to fabric Attention If you are ironing a blended fiber, set the temperature according to the lower temperature fiber. Getting started flashing You can use the iron when the temperature lamp stops...
Charging the iron When not using the iron, or when straightening the clothes, return Straight onto the the iron to the stand so it goes straight onto the contacts. contacts until it stops If the temperature lamp is flashing, wait until it stops flashing and stays lit before you use the iron.
Cleaning the iron Attention Always unplug the power plug from the electrical outlet, and allow the iron to cool completely. Dirt on the iron and stand Use a soft dry cloth or a damp cloth to wipe the iron and stand. Dirt on the contact pins Wipe with a dry cloth.
Troubleshooting Refer to the following points if you think something is wrong. Problem Where to check Solution Does not heat up. Power plug Plug the power plug completely into an electrical outlet. SET / OFF button Change the setting to the temperature that is most appropriate for the fabric.
Page 26
안전상의 주의사항 반드시 지켜 주십시오 제품 및 취급설명서에는 사용하시는 분이나 다른 사람들에 대한 위해 및 재산피해 미연 방지, 안전하고 올바른 사용을 위한 중요한 내용이 기재되어 있습니다. 다음 내용(표시·그림기호)을 잘 이해하고 나서 본문을 읽어 주시고, 기재사항을 지켜 주 십시오. 표시의 설명 그림기호의...
Page 27
화재 · 감전 · 화상 · 부상 등을 방지하기 위하여 전원플러그 및 전원코드는 전원코드를 손상시키거나 무리하게 구부리거나 잡아당기거나 뒤틀거나 다발로 묶거나 무거운 것을 올려놓거나 끼워넣거나 가공하지 않는다 전원코드나 전원플러그(전원측 및 본체측)가 손상되었거나 콘센트의 꽂는 부분이 헐거울 때는 사용 하지 않는다 y 전원플러그는...
Page 28
당부사항 다리미의 고장 및 파손 등을 방지하기 위하여 핸들은 강한 힘으로 너무 누르지 마십시오 버튼, 지퍼 등 딱딱한 것을 다림질하지 마십시오 파손의 원인이 됩니다. 손상의 원인이 됩니다. 열판을 스탠드의 면이나 케이스에 갖다 대지 마십시오 다리미나 스탠드에 물을 끼얹지 마십시오 변형되거나...
Page 29
사용하기 전에 케이스를 분리 물을 주입(재차 주입)한다 전원을 넣는다 한다 전원코드를 스탠드에 꽂고, 드라이 다림질로서 사용할 때는 탱크에 물을 넣지 않 전원플러그를 콘센트에 꽂습 양측에 있는 케이스 버튼을 잡 고서도 사용할 수 있습니다. 니다. 고 화살표와 같이 바깥쪽으로 열고 나서( ) 들어올립니다. 스팀/드라이...
Page 30
각부의 명칭과 기능 접점부 열판 스탠드 다리미 스팀 분출구멍 접점 (52개) 접속핀 스탠드면 조작부 잠금 버튼 케이스 핸들 손잡이 열판 (FVW100 : 니켈 보론 코팅) 다리미 (FVW90 : 실버티타늄 다이아몬드 코팅) 커버 항균유리·플래티늄 볼 FVW100:항균유리·플래티늄 볼 FVW90:항균유리만 해당 케이스...
Page 31
조작부 FVW100의 조작부입니다. 미스트 분출구 스팀/드라이 전환레버 물 주입구 드라이의 경우 스팀의 경우 (2종류의 [스팀]중에서 선택) 물 주입 구 뚜껑 드라이 스팀 샤워 스팀 미스트(분무) 버튼 버튼을 누르면 미스트가 분사됩니다. 샷 버튼 버튼을 누르면 울트라·걸어두고 샷이 분사됩니다. (반 드시 [HIGH] 눈금 설정에서 사용하십시오) 온도표시...
Page 32
사용방법 스팀 다림질 온도설정 스팀 SET/OFF 버튼을 눌러 천에 맞추어서 온도 눈금을 설정합니다. 온도표시 램프가 점멸합니다. (31페이지 참조) 천에 맞추어서 샤워 스팀·울트라 샷·걸어두고 샷 SET/OFF 버튼을 눌러 [HIGH] 눈금으로 설정합니다. 온도표시 램프가 점멸합니다. [HIGH] 눈금 이외로 설정하면, 물이 새거나 샷이 분사되지 않을 수 있습니다. 반드시...
Page 33
울트라 샷 및 걸어두고 샷의 사용방법 샷을 사용할 때 스팀/드라이 전환레버는 드라이· 스팀· 샤워의 어느 상태에서도 사용할 수 있습니다. 면이나 마의 주름을 펼 때는 통상적인 다림질을 권합니다. 섬유의 종류나 두께, 주름의 정도에 따라서 주름이 잘 펴지지 않을 경우가 있습니다. 강력한 스팀으로 모 제품의 주름을 펴거나 세운...
Page 34
사용방법 드라이 다림질 온도설정 SET/OFF 버튼을 눌러 천에 맞추어서 온도 눈금을 설정한다. 온도표시 램프가 점멸합니다. (31페이지 참조) 천에 맞추어서 당부사항 혼방인 경우는 낮은 쪽 섬유에 맞추어서 온도를 설정하십시오. 사용개시 점멸 점등 온도표시 램프가 에서 으로 바뀐 후에 사용한다. (다리미를 스탠드로부터 분리하면 온도표시 램프는 소등됩니다) 스팀/드라이...
Page 35
전기를 공급할 때 다리미를 사용하지 않을 때나 의류를 정리할 때는 스탠드의 접점부에 똑바로 멈출 때까지 되돌려 놓으십시오. 접점부에 똑바 온도표시 램프가 점멸하고 있을 때는 점등할 때까지 기다리십시오. 로 멈출 때까지 당부사항 온도설정을 고온에서 저온으로 바꾼 경우는 온도표시 램프가 점멸에서 점등으로 바뀐 후에 사용하십시오. ([HIGH]에서...
Page 36
손질 방법 당부사항 반드시 전원플러그를 콘센트에서 뽑고, 다리미가 충분히 식은 후에 실시하십시오. 다리미 및 스탠드의 얼룩 부드러운 천으로 마른 걸레질을 하거나 젖은 천으로 닦으십시오. 접속핀의 얼룩 마른 천으로 닦으십시 오. 접속핀 열판의 얼룩 스프레이 풀을 사용한 후에 젖은 천으로 닦으십시오. 스팀...
Page 37
고장인가? 라고 생각될 때는 이상을 느꼈을 때는 다음 사항을 체 크하십시오. 이러할 때 체크할 곳 처치 뜨거워지지 않는다 전원플러그 콘센트에 확실하게 꽂으십시오. SET/OFF 버튼 천에 가장 알맞은 온도설정으로 변경하십시 오. 스탠드에 올려 놓은 상태 다리미를 스탠드에 올바르게 다시 올려 놓으 십시오.