Philips InnoSpire Go Manual page 8

Cleaning
After each use:
• Pour away residual medication from the medication chamber.
• Press the mouthpiece assembly release button to separate the mouthpiece assembly from
the handset.
• Rinse the mouthpiece assembly thoroughly under running tap water.
• Shake off excess water and allow to air dry fully before storing.
Daily cleaning
• Wash the mouthpiece assembly by hand in a bowl of warm soapy water
(liquid dishwashing soap) for 2 minutes.
• Rinse the mouthpiece assembly thoroughly under running tap water.
• Shake off excess water and allow to air dry fully before storing.
Weekly disinfection
CAUTION: Risk of scalding. Use care around boiling water and in handling hot parts.
• Prior to disinfection, ensure all parts are visibly clean and
free from dirt.
• Boil the mouthpiece assembly in water for 10 minutes.
Ensure the medication chamber lid is open and there
is enough water in the pan to prevent the mouthpiece
assembly from touching the bottom or boiling dry.
Shake off excess water and allow to air
dry fully before storing.
Or
• Disinfect the mouthpiece assembly in a Philips Avent baby bottle electric steam sterilizer, or
equivalent, for one cycle (follow the instructions of the steam sterilizer). Allow to air dry fully
before storing.
Or
• Wash the mouthpiece assembly by hand in a bowl of warm soapy water (liquid dishwashing
soap) for 2 minutes. Rinse the mouthpiece assembly thoroughly under running tap water.
• Immerse the mouthpiece assembly in a disinfectant of the Gluteraldehyde group (testing
performed with Korsolex Extra, 4%) agitate the mouthpiece assembly for 1 minute and soak
for 15 minutes. Rinse thoroughly; always use according to the manufacturer's instructions.
• Wipe your handset clean with a clean damp cloth weekly or as needed. Do not use other
cleaning methods or solutions.
8
1128271R02_InnoSpireGo_Euro2_Spreads_IFU_10B_FINAL.indd 8 11/8/17 5:07 PM