Transmission Option Menus - GE MobileView User Manual

5 DVR Configuration
6) Use the keys to select the cameras you
want grouped to the input and the
move to the next camera. The images from the
camera grouped to the input will be tagged
when an alarm or trigger is activated. Press
the key to advance to the Input Notify
menu (Figure 68).
Note: Group cameras to an input only if the input is enabled in
the system as either an alarm or a trigger.
Note: Grouping will have a different effect on an alarm than
on a trigger. If the input is an alarm, the grouped cameras
will begin taking pictures at the highest resolution and the
fastest rate. ONLY GROUPED CAMERAS WILL TAKE
PICTURES IF AN ALARM IS ACTIVATED. If the input is a
trigger, all cameras will continue to take pictures, but the
grouped cameras will have priority and take more pictures.
7) Use the keys to select whether you want the
input to notify when there is an alarm. If you select
this option, the modem will dial the central station
when the alarm is activated. Press the
return to the Select Input menu (Figure 62).
8) In the Select Input menu, use the
to select the next input.
9) When you have finished configuring inputs, use
the keys in the Select Input menu to return
the selection to "none, " and press the
to advance to the Setup Transmission menu
(Figure 69).
5.1.3 T
RANSMISSION
If your system includes the transmission option, please
refer to the Transmission Manual. If you are not using
the transmission option, perform the following steps:
1) Use the key to set the answer to "Setup
Transmission?" to "yes" (see Figure 69).
2) Press the to advance to the "Transmission Modem"
screen. Ensure that the display reads, "Not Used."
3) Press the key. The "Central Station Number"
screen appears. Leave it blank.
4) Press the key. The Central IP Address" display
appears. Leave it blank.
32
keys to
key to
keys
key
O M
PTION ENUS
GROUP CAMERAS TO INPUT 1
1 2 3 4 5 – – –
Figure 67. Group Cameras menu
INP. 1 NOTIFY ON ALARM?
NO
Figure 68. Input Notify menu
SETUP TRANSMISSION?
YES
Figure 69. Setup Transmission menu
TRANSMISSION MODEM IS:
NOT USED
CENTRAL STATION NUMBER:
<
1036564B / October 2002
MobileView User Manual
NEXT
NEXT
NEXT
NEXT
> NEXT