Troubleshooting - GE MobileView User Manual

Mobile digital video recorder
Table of Contents

Advertisement

MobileView User Manual
T
6
ROUBLESHOOTING
S
:
TATUS INDICATORS
K
:
EYPAD
When the DVR is not running, but 24 VDC continuous
power is supplied, the keypad will briefly display the
Starting screen (Figure 89), and then will change to the
MobileView screen (Figure 90).
At DVR boot up, the DVR running screen (Figure 91)
will appear. This screen displays the average pictures
per second in the upper right-hand corner.
Note: If you have a MobileView II system, the DVR running screen
will state "MobileView II," not "MobileView III."
Note: In a MobileView III system, if the time has been set to daylight-
saving time, the time reading on the DVR running menu will have a
semi-colon instead of a colon (e.g., the time would
read 8;51 instead of 8:51).
A
:
DJUSTING AUDIO
To test the audio setting, remove the front panel and
adjust the volume using the buttons indicated in
Figure 92. The left button increases volume, and the
right button decreases volume. Audio settings will be
displayed on the keypad.
O
PTIONAL STATUS LIGHTS
The status lights will alert you to the status of the DVR.
DVR status lights should not be confused with DVR
LEDs. The LEDs are located on the front of the
removable DVR unit. The term status lights is used to
refer to any lights or LEDs connected to the two
outputs from the DVR, such as the MobileView Panic
Button. Status lights are optional and can be mounted
anywhere, depending upon the installation.
Note: Some properties customize the DVR status outputs and use another device, such as an IO or PLC, to control the lights.
Output 1 corresponds to Check System and Output 2 corresponds to Normal.
Output 2: the DVR is running and capturing images.
Output 1 and 2: the DVR is running and capturing images with an exception (e.g., loss of signal
from a camera). Check the Recorder Log of the DVR to investigate further.
Output 1: the DVR has encountered an error and is not capturing images.
No lights: the DVR is not running.
1036564B / October 2002
:
STARTING EMBEDDED
PROCESSOR
Figure 89. Starting screen
KALATEL INC.
MOBILEVIEW II
Figure 90. MobileView screen
6/6/02
8:51
MOBILEVIEW III
Figure 91. DVR running screen
Figure 92. Location of volume-control buttons

6 Troubleshooting

0FPS
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mobile view

Table of Contents