Product Overview; Controls - Toro 30187 Operator's Manual

Product Overview

Figure 10
1. T-bar control
2. Handle
3. Gas tank
4. Engine

Controls

Become familiar with all the controls (Figure 11)
before you start the engine and operate the
machine.
5. Tire
6. Battery
7. Engine cooling screen
Figure 11
1. Throttle control
2. Blade control bail
3. Blade control switch (PTO) 7. Ignition switch
4. Upper control bar
Throttle Control
The throttle control has three positions: Choke,
Fast and Slow.
Blade Control Bail
The bail is used in conjunction with the power
take off switch (PTO) to engage the clutch to drive
the mower blades. Release the mower control bail
to disengage the mower blades.
Blade Control Switch (PTO)
This pull switch is used in conjunction with the
blade control bail to engage the clutch to drive the
mower blades.
Upper Control Bar
Shift to the desired gear and push forward
on the upper control bar to engage forward
traction operation and pull back to brake forward
movement. Pull back on right side of upper
control bar to turn right and left side to turn left.
Reference Handle
Limits forward travel of the control bar to a pre-set
position to help maintain desired ground speed
17
5. Reference handle
6. Quick release lever