Table of Contents
Advertisement
Set the cooking time using the rotary selector.
2.
Press the
0
button repeatedly until the
3.
disappears from the clock display.
The setting is adopted.
If the operation has not yet started, press the
4.
You will see the cooking time counting down on the clock
display.
The cooking time has elapsed
A signal sounds. The oven stops heating.
the clock display. You can cancel the audible signal earlier by
pressing the
0
button.
Cancelling the cooking time
Use the
0
button to select the
rotary selector to reset the cooking time to
button repeatedly until the
Î
the clock display.
Changing the cooking time
Use the
0
button to select the
cooking time using the rotary selector. Press the
repeatedly until the
Î
rotary symbol disappears from the
clock display. The modified cooking time can be seen counting
down.
Calling up the clock, cooking time and end time
You can call up all the functions with the
Setting a later end time
A later end time can be set for
all types of heating
■
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time must be set. Operation must not
have started.
VWDUW
ƒ&NJ
VWRS
Î
rotary symbol
button.
†
:
is shown on
‹
‹‹
Nx
cooking time. Use the
:
. Press the
‹
‹‹
rotary symbol disappears from
Nx
cooking time. Change the
button
0
clock button.
0
Use the
0
button to select the
1.
The end time appears. This is the time at which the meal will
be ready
RQ
3
0
RII
Using the rotary selector, set a later end time.
2.
0
Press the
button repeatedly until the
0
3.
disappears from the clock display.
Press the
†
button.
4.
The oven goes into standby. The
time that has been set is shown on the clock display. As soon
as operation starts, you will see the cooking time counting
down.
The cooking time has elapsed
A signal sounds. The oven stops heating.
clock display. You can stop the audible signal by pressing
the
button.
0
Correcting the end time
This is only possible as long as the oven is in standby. Use
the
0
button to select the
using the rotary selector. Press the
the
Î
rotary symbol disappears from the clock display. The
new end time is applied.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
Following a power cut,
display. Set the current time.
Press the
button.
0
1.
The arrow is next to the symbol for the cooking
time
.
:
is shown in the clock display.
N0
‚ƒ
‹‹
Turn the rotary selector to set the current time.
2.
Press the
button.
0
3.
The menu is exited. The current time is shown in the clock
display.
Changing the clock
If you wish to change the time from summer to winter time, for
example, press the
0
the
N0
symbol for the clock. Then proceed as described in
points 2 and 3.
Ny
end time.
ƒ&NJ
ƒ&NJ
rotary symbol
Î
†
button lights up. The end
:
is shown on the
‹
‹‹
Ny
end time. Adjust the end time
0
button repeatedly until
:
and the
symbol are lit in the
‹
‹‹
0
button twice. The arrow is next to
VWDUW
VWRS
VWDUW
VWRS
15
Advertisement
Table of Contents
