Enter The Job Settings; Procedure For A New Job - Canon Oce BLM550+ Operation Manual

Enter the Job Settings

Introduction
Make the settings for a new job in the BASIC
"The User Interface" for more information.
The PAPER SIZE and PAGE DIRECTION settings are entered on the touch screen. These
dimensions refer to the format of the paper when it enters the Booklet maker.
IMPORTANT
Do not operate the touch screen with a sharp object or with too much force. These actions can
damage the touch screen.
NOTE
The paper size must be measured with an accuracy of 0.5 mm.
Step Action
1 Print a set to the stack-
er.
2 Measure the sheet
size.
Measure the sheet
thickness or the set
thickness.
3 Use these dimensions
for the job setting.

Procedure for a New Job

Step Action
1 Touch BASIC
2 Enter the paper size
3 Enter the page direc-
tion
4 Enter the page rota-
tion setting
window on the touch screen. See the chapter
Information
Measure the set accurately. To make an accurate book you
must enter accurate paper dimensions into the touch screen.
To get the best accuracy, use millimeters to measure the set.
If needed, set the Booklet maker to use millimeters:
• Touch MENU.
• Select Supervisor access level.
• Touch MENU > CONFIGURE
• Touch mm > CLOSE.
Information
Touch PAPER SIZE. Enter the dimensions of the paper.
The job setting is easier if you first select a preset paper size,
then adjust the settings as necessary
Touch PAPER SIZE > PRESETS > A3 or A4. (USA: 11x17,
8.5x11 or 8.5x14)
Touch PAGE DIRECTION > LANDSCAPE or PORTRAIT.
If the PAGE DIRECTION option is not available, the PAGE DI-
RECTION cannot be changed.
For A4 paper size, the normal setting for ROTATE is ON. Rota-
tion lets the printer operate at optimum speed.
Touch ROTATE to turn the sheet rotation ON or OFF. Always
select the page direction before you change the rotate set-
ting.
Chapter 3 - How to run the Booklet maker
Enter the Job Settings
> MACHINE OPTIONS.
4
21