Canon Oce BLM550+ Operation Manual page 80

Error Messages
Problem
JAM AT STACKER INFEED
JAM AT STACKER OUTFEED
JAM BEFORE TRIMMER
JAM IN CONNECTING BRIDGE There is a paper jam in the
JAM IN GATHERING AREA
JAM IN STACKER AREA
JAM IN STITCHER AREA
JAM IN STITCH HEAD
JAM IN TRIMMER
MAIN CONTROL - No comms
80 Chapter 6 - Error Conditions, Problems and Solutions
Cause
There is a jam in the stacker
infeed. Remove the books
from the stacker infeed. Press
the reset button on the stack-
er.
There is a jam in the stacker
outfeed or there are paper
trimmings in the stacker out-
feed. Remove the books from
the stacker outfeed. Check for
paper trimmings and remove
them if present. Press the re-
set button on the stacker.
There is a book jammed be-
fore the trimmer. Open the
main deck to remove the
book.
connecting bridge. Clear the
jam and continue.
There is a paper jam in the
gathering area. Open the con-
necting bridge cover, lift the
connecting bridge and remove
the paper jam.
There is a paper jam at the
outfeed of the machine. Re-
move the jammed books and
continue.
There is a paper jam in the
stitch area. Open the folder
cover, remove the paper jam
and continue.
There is a jam in the stitch
head.
There is a book jammed in the
trimmer. Clear the jam and
continue.
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
Solution
Jam at Book Stacker in-
See
feed on page 104
Jam at Book Stacker out-
See
feed on page 105
Jam before the Trimmer
See
on page 91
Jam in the Connecting
See
Bridge on page 87
Jam in the Gathering Area
See
on page 88
Jam in the Stitch Area on
See
page 89
Clear a Stitch Head Jam
See
on page 97
Jam in the Trim Area on
See
page 93
4