GE AV-300i User Manual page 117

Output vlt ref src
Outvlt lim src
Output vlt ref cfg
Dyn vlt margin
Int Outvlt lim
Output vlt ref 0mon
Available Outvlt
In use Outvlt ref
The limit in use on the output voltage is calculated as follows:
- The starting point is the Available Outvlt;
- This is limited by the Int Outvlt lim;
- The Dyn vlt margin is applied on the resulting value.
AV-300i Version 2 User's Guide
Signal selection of the Output volt lim source
Voltage margin for the flux regulation
Limit of the output voltage
Monitor for the maximum available output voltage. It is calculated directly starting
from the DC link voltage.
Limit in use on the output voltage
—————— Function Description ——————
Ch.1
117