Chapter 3 : Aspire Conference Bridge PCB ConÞguration
Chapter 3 : Aspire Conference Bridge PCB ConÞguration
16CNFU PCB CONFIGURATION
ConÞguring the 16CNFU PCB
When installed for the Þrst time, the 16CNFU PCB (P/N 0891069) comes up with the factory default parameters
shown in Table 2: Network Settings for TCP/IP Addressing.
In this conÞguration, the PCB cannot run in every environment. Therefore, its parameters must be redeÞned
before it can work in your environment. The required parameters can be set using your web browser and connect-
ing to the default IP address 192.168.1.100 in the browser's navigation address bar.
Note:
Aspire Conference Bridge Manual
Table 2: Network Settings for TCP/IP Addressing
IP Address
Subnet Mask
Default Gateway
Internet Explorer 6.0 or higher is recommended.
16CNFU PCB CONFIGURATION
Chapter 3
192.168.1.100
255.255.255.0
0.0.0.0
◆ 7