Chapter 4 : Aspire Conference Bridge PCB Web Manager
Using the Web Manager
Set Date and Time
The Set Date and Time page allows the user to conÞgure the date and time of the 16CNFU PCB. The default
setting is to receive the time from the Aspire system. However, the installer may also use an NTP server to set
date and time or set the date and time manually.
●
Use NTP Server for setting system time
This setting allows the installer to synchronize to the NTP Server.
●
Use CPU Time
The Conference bridge will automatically be synchronized with Aspire NTCPU clock.
●
Set date and time manually
Technicians may manually enter the date and time.
42 ◆
Use Daylight Savings must be check if using NTP Server.
Aspire Conference Bridge Manual