Philips Sonicare AirFloss Ultra Manual page 13

Handle and nozzle
1 Remove the AirFloss Ultra nozzle from the handle. Rinse the
nozzle after each use to eliminate the residue left in it. (Fig. 16)
2 Open the reservoir and rinse it under a faucet to eliminate residue.
(Fig. 17)
Tip: You can also use a cotton swab to wipe the reservoir and
remove the remaining residue.
Note: Do not immerse the handle in water.
Note: Failure to remove residue from the nozzle or reservoir may
result in an unhygienic condition.
3 Wipe the entire surface of the handle with a damp cloth. (Fig. 18)
Charger
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth. (Fig. 19)
Storage
If you are not going to use AirFloss Ultra for an extended period of
time, follow the steps below.
1 Open the cover of the reservoir and empty it.
2 Press the activation button until no more spray comes out of the
nozzle.
3 Unplug the charger.
4 Clean AirFloss Ultra nozzle, handle and charger. Refer to chapter
'Cleaning'.
5 Store AirFloss Ultra in a cool, dry place away from direct sunlight.
Recycling
- This symbol means that this product shall not be disposed of with
normal household waste (2012/19/EU) (Fig. 28).
- This symbol means that this product contains a built-in
rechargeable battery which shall not be disposed of with normal
household waste (Fig. 29) (2006/66/EC). Please take your product
to an official collection point or a Philips service center to have a
professional remove the rechargeable battery.
13
English