Phone Calls; General; Power Supply And Charging; Guidance Messages - Panasonic RB-M700B Operating Instructions Manual

Digital wireless stereo headphones
Hide thumbs Also See for RB-M700B:
Table of Contents

Advertisement

Phone Calls

You cannot hear the person on the other end of the call.
• Make sure that the unit and the Bluetooth
• Check if the unit and the Bluetooth
• Check the audio settings of the Bluetooth
®
Bluetooth
enabled phone. (
• If the volume of the other person's voice is too low, increase the volume of both the unit and the Bluetooth
phone.
Cannot make a phone call.
• Check if the Bluetooth
l
music" (
10) and "Making a phone call" (
phone.

General

The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the
l
USB charging cord. (

Power supply and charging

Cannot charge the unit. / The power/pairing LED does not light during charging. / Charging takes
longer.
• Is the USB charging cord connected firmly to the USB terminal of the computer? (
• Make sure to charge in a room temperature between 10 oC and 35 oC.
• Make sure the computer is turned on and is not on standby or sleep mode.
• Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector
from its current port and plug it into one of the other ports.
• If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.
• It takes approx. 4 hours to charge the battery from empty to full.
• If the charge time and operating time become shortened, the battery may have run down. (Number of charging times
of the installed battery: Approximately 300)
• The power/pairing LED lights in red when charging is in progress. When charging is completed, the power/pairing
LED will go out.
The power does not turn on. / The power turns off.
• Is the unit being charged? The power cannot be turned ON during charging. (
• The battery is low when the power/pairing LED is blinking in red. Charge the unit.
• Is auto power off active? (

Guidance messages

The audio guidance language has changed.
• The audio guidance language can be switched. (
®
enabled phone are turned on.
®
enabled phone are connected. (
®
enabled phone. Switch the calling device to the unit if it is set to the
l
8)
®
compatible device supports "HSP" or "HFP" profile. For details on profiles, see "Listening to
l
15)
l
15)
Other
12). Also refer to the operating manual for the Bluetooth
l
14)
19
l
8)
l
7)
l
7)
®
enabled
®
enabled

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents