Connecting A Bluetooth ® Device; Pairing (Registration) This Unit With The Bluetooth Device For Connection - Panasonic RB-M700B Operating Instructions Manual

Connecting a Bluetooth
Preparation
• Place the Bluetooth
• Check the device operation using its operation instructions as required.
Pairing (Registration) this unit with the Bluetooth
1
In the power-off state, press and hold [
When pairing a device for the first time:
When pairing a second or subsequent devices:
• This unit will start to search for a Bluetooth
in blue and red.
2
Turn on the power of the Bluetooth
3
Select "RB-M700B" from the Bluetooth
• A MAC address (an alphanumeric character string that is displayed by
and unique to the device) may be displayed before "RB-M700B" is
displayed.
• If prompted for a passkey, input the passkey "0000 (four zeros)" of this
unit.
4
Check the connection with the Bluetooth
unit.
• The power/pairing LED will light alternately in blue and red until the connection with the device is completed.
When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.
(Connection established)
Note
• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairing
again. (Except for when noise cancelling is turned ON.)
• You can pair up to 9 Bluetooth
will be replaced. To use it, perform pairing again.
®
device within approx. 1 m from the unit.
®
devices with this unit. If a 10th device is paired, the device with the oldest connection
Preparation
®
device
®
device for connection
] of this unit until the power/pairing LED blinks.
approx. 3 seconds
approx. 5 seconds
®
device to connect to, and the power/pairing LED will light alternately
®
device, and enable the Bluetooth
®
device's menu.
®
device on the
8
®
function.
e.g.
Bluetooth
Bluetooth ON
Device
Select
RB-M700B