Resetting The Fault Codes; Exiting Diagnostic Mode - Toro 07068 Operator's Manual

Resetting the Fault Codes

After solving the problem, disconnect and reconnect the diagnostic connectors. The diagnostic light will flash
continuously once per second.

Exiting Diagnostic Mode

1. Turn the key to the
2. Disconnect the power by separating the vehicle harness from the sweeper harness.
3. Disconnect the diagnostic, shunt connectors.
4. Push the tethered cap onto the 2 diagnostic, shunt connectors.
5. Connect the vehicle and sweeper wiring harness together to power the sweeper.
position.
RUN
33