3 BBU3900 Equipment
DIP
Switch
All the DIP bits of SW2 are set to OFF by default. When four E1 links are faulty, you should
set all the DIP bits of SW2 to ON so that the faults are rectified.
3.2.3 WBBP
The WCDMA Baseband Process Unit (WBBP) of the BBU3900 processes baseband signals.
Panels
The WBBP has three types of panels, as shown in
Figure 3-8 Panel of the WBBPa
Figure 3-9 Panel of the WBBPb
Figure 3-10 Panel of the WBBPd
Functions
The WBBP has the following functions:
3-10
DIP Status
1
2
ON
ON
Other settings of the DIP bits
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
4
ON
ON
Figure
3-8,
Figure 3-9
BBU3900
Hardware Description
Description
Unbalanced
Mode
Disabled
and
Figure
3-10.
Issue 11 (2010-11-10)