BBU3900
Hardware Description
No.
6
7 and 8
5.7 WGRU
The WGRU (WCDMA GPS Receiving Unit) receives and processes positioning information
and synchronization timing signals from the GPS, and then outputs the timing signals as a system
clock source. These timing signals and positioning information can be used to generate PPS
signals and Network Assisted GPS (AGPS) positioning information. The WGRU is optional for
the NodeB which is installed in the WGRU box. The NodeB can be configured with one WGRU
which provides the positioning function.
Appearance
Figure 5-10
box.
Figure 5-10 Exterior of the WGRU
Issue 11 (2010-11-10)
Function
Selects baud rate for
communicating with the BTS
Reserved and not defined
shows the exterior of WGRU,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Auxiliary Devices of the BBU3900
Operation
Set as ON, indicating that the
baud rate is 9600. (If it is set
as OFF, the baud rate is
19200.)
Set as OFF
Figure 5-11
shows the WGRU installed in the WGRU
5-15