Husqvarna 243RJ Workshop Manual page 58

7
56
Crankshaft and crankcase
Check that the pulse channel in the cylin-
der is open.
Assemble the cylinder with the help of as-
sembly set 502 50 70-01.
502 71 27-02
Check that the pulse channel in the cylin-
der is open.
Place a new gasket on the base of the
cylinder or crankcase. Lubricate the piston
and the crank bearing with a few drops of
engine oil.
Assemble the cylinder with the help of the
piston ring compressor in the assembly
set 502 50 70-01.
NOTE!
Do not turn the cylinder, as the
piston rings can easily be broken.
Tighten the 4 screws diagonally
crosswise.
502 50 70-01