Figure 4-6 Main Window (Initial Display); Figure 4-7 Communication Type Window - Hitachi J.NET User Manual

4. Operation
(3) Starting up J.NET SYSTEM/S10VE
In the Tool Execute window (Figure 4-5), from the list box, select J.NET SYSTEM/S10VE, and then
click the Execute button. The main window (Figure 4-6) appears.
In this state, PCs are not connected yet. To connect to PCs and then reference J.NET module settings or
RAS information, see (4) Startup in online state. To create or edit a J.NET module configuration
information file without connecting to PCs, see (5) Startup in offline state.
(4) Startup in online state
(a) In the main window (Figure 4-6), select the Online radio button, and then click the Change
connection button. The Communication type window (Figure 4-7) appears. Specify the IP address
of the connection destination, and then click the OK button. (For details about how to select the
communication type, see 4.1.6 Changing connections.)
The default communication type is the one last set by using the Change connection option of BASE
SYSTEM/S10VE.

Figure 4-6 Main window (initial display)

Figure 4-7 Communication type window

4-8