Siemens DMS8000 MP4.30 Connectivity Manual page 30

SISTORE MX / MX Pro /
MX NVS models (SDK
1.4)
SISTORE IP address:
read it in the Admini-
stration  Configura-
tion  Network page of
the SISTORE MX soft-
ware
SISTORE user(s): read
it in the
Administration 
Configuration  User
Management page of
the SISTORE MX soft-
ware
Note: Check that user(s)
is/are enabled to Display
and Playback function,
respectively
SISTORE SX / CX / MX
(SDK 2.5) models
SISTORE IP address:
read it in the SISTORE
Config page
Admin user: find it in the
user Administration
Client software
28
Building Technologies
Fire Safety & Security Products
Fig 19 SISTORE MX / MX Pro / MX NVS (SDK 1.4) settings
Fig 20 SISTORE SX / CX / MX (SDK 2.5) settings
Creating video inputs and connecting the cameras
1. Select and expand the SISTORE node.
2. Select and expand the SISTORE Video In folder.
3. Add the required video inputs: note that input number can be customised.
4. Select and expand the Video Cameras folder.
5. Select the video-out node of the camera.
6. Drag and drop the Video Out signal to the SISTORE Video In node (Fig 21).
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
06.2010