Clock - Panasonic PT-52DL10 Operating Instructions Manual

CLOCK

CLOCK is valid only during PC mode.
When an RGB signal is projected, minor adjustments of the dot clock frequency and adjustments of the phase can be made.
Adjusting the clock
When the set is connected to the PC, CLOCK can be adjust.
1 Connect a computer to the projection TV.
2
MENU
3
TV/VIDEO
1
Press the MENU button to display the MENU screen and select CLOCK.
CH
ACTION
VOL
CH
2
CH
ACTION
VOL
CH
MENU
DOT CLOCK: Minor adjustments of the dot clock frequency
When a PC signal is projected, the display area of the computer image can be adjusted.
CLOCK PHASE: Phase adjustment
Flickering or bleeding of the contour appearing on the screen when projecting a PC signal, can be
adjusted so that it does not appear.
Notes:
•
NORMAL is displayed at default. When settings are altered, the display changes to NORMALIZE.
•
The DOT CLOCK advances in increments of 2.
60
Press to select the PC mode.
Press to display the MENU screen.
Press to select to CLOCK.
VOL
Press to display the CLOCK screen.
Press to select the CLOCK PHASE or
DOT CLOCK.
Adjust the level.
VOL
Press to exit menu.
PC
MENU
ADJUST CUSTOM SET UP
PICTURE
PICTURE ADJUST
POSITION/SIZE
CLOCK
AUDIO
AUDIO ADJUST
MENU
ADJUST CUSTOM SET UP
PICTURE
PICTURE ADJUST
POSITION/SIZE
CLOCK
AUDIO
AUDIO ADJUST
PAGE
SELECT
ACTION
EXIT
CLOCK
NORMAL
CLOCK PHASE 0
DOT CLOCK 0
ADJUST
SELECT
ACTION
EXIT
CLOCK PHASE: 0 –15
DOT CLOCK: -16 – 16