Table of Contents
Advertisement
PICTURE Adjustment
CLOCK PHASE/DOT
CLOCK
CLOCK PHASE and DOT CLOCK are valid only during PC input mode.
When an RGB signal is projected, minor adjustments of the DOT CLOCK frequency and adjustments of the phase can be
made.
1
In PICTURE menu press to select PC ADJ.
Press to enter submenu field.
In PC ADJ. submenu field press to select
CLOCK PHASE or DOT CLOCK.
Press to adjust the level.
CLOCK PHASE:
0 -
+31
DOT CLOCK:
-8
-
+8
CLOCK PHASE:
DOT CLOCK:
Phase adjustment.
Flickering or bleeding of the contour appearing on the screen when projecting a PC signal, can be
adjusted so that it does not appear.
During PC setting in DIGITAL-IN input mode, the adjustment range is 0-1.
Minor adjustments of the dot clock frequency.
When a PC signal is projected, the display area of the computer image can be adjusted.
During PC setting in DIGITAL-IN input mode, adjustment is not available.
Note:
The DOT CLOCK advances in increments of 2.
SIZE
SIZE is valid only during 720 x 1280 RGB signal input in DIGITAL-IN mode.
In PICTURE menu press to select PC ADJ.
Press to enter submenu field.
In PC ADJ. submenu field press to select SIZE.
Press to select 1 or 2.
SIZE1:
Over scan (Native)
SIZE2:
Under scan (compression)
32
Advertisement
Table of Contents
