(When The Code Is Not Known) - Panasonic 52DL52 - PT - 52" CRT TV Operating Instructions Manual

Operating peripheral equipment using the remote control
Programming Without A Code
(When the code is not known)
This procedure searches all codes and is called the "sequence method."
r
ill v_l Jvc II l
f: EXIT PAGE GUIDE
0_0
®®®l
®®®1
PIp MIN PqP MAX
REW pLAy FF
I
1 Confirm that the external component is plugged in and on.
2
Turn the component off.
3
Press POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
4 <_ _ [_ % Ph_SStohdemode key.
0_ _% out. key will illuminate steadily, all others will go
5
Press to move forward to the next code, or to move
backward.
Control (_) to test the component. If the procedure was
Press the Remote
successful, the component will turn on.
Note:
Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
After the code is found, press ACTION to store the code.
Note:
The step and set mode will start from the current device (not the beginning of the
list, except for the first time).
59