Safety Information - Silvercrest SHGB 50 B1 Operating Instructions Manual

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to properly installed mains power
►
sockets supplying a mains power voltage of 220 – 240 V ∼,
50/60 Hz .
In event of operating malfunctions and before cleaning the
►
appliance, remove the plug from the mains power socket .
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself .
Ensure that the power cable does not become wet or moist
►
during use . Route the cable in such a way that it cannot be
crushed or damaged .
Never take hold of the appliance, the power cable or the
►
power plug with wet hands .
In case of damage to the appliance or its power cable,
►
request a replacement appliance or cable from the
manufacturer, its customer service or a similarly qualified
person in order to avoid hazards .
Do not use the appliance outdoors .
►
Do not use extension cables – this will make it easier to
►
disconnect the appliance quickly in an emergency .
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over .
Do not wrap the power cable around the appliance .
►
Protect it from damage .
Never immerse the appliance in liquids or never allow liquids
►
to penetrate the appliance housing . Do not subject the
appliance to humidity . If liquid does get into the housing,
disconnect the appliance from the mains power socket
immediately and have the appliance repaired by a qualified
technician .
SHGB 50 B1 GB │ IE │ NI │ CY │ 3 ■