Panasonic DBS Configuration Note page 9

Smooth operator
Hide thumbs Also See for DBS:
Table of Contents

Advertisement

O c t e l C o m m u n i c a t i o n s
Smooth Operator Configuration Note (77200)
Panasonic DBS
5.10
CONFIGURING SUBSCRIBERS STATIONS
System Call forwarding is used to forward subscribers stations to the
Smooth Operator. If call forward is set from the subscribers station it will
temporarily override the system forwarding.
The system call forward presented below is for DBS version 3.1 and
higher. If you wish to use call screening or queuing you would want to use
option 3, otherwise, for an integrated system, you would use option 1.
Permanent Call Forward Type:
FF3 (subscribers extension) 42# (0 - 3)#
0 = Permanent call forwarding: off
1 = Permanent call forwarding: busy / no answer
2 = Permanent call forwarding: busy
3 = Permanent call forwarding: no answer
Repeat this step as needed for subscribers stations.
Permanent Call Forward Extension:
FF3 (subscribers extension) 43# (Smooth Operator port/extension)#
Repeat this step as needed for subscribers stations.
Call Forward No Answer Timer:
This timer determines how many seconds an unanswered call will ring
before it is forwarded to another destination.
FF1 3# 19# (0 to 15)#
0 = forward after 4 seconds
1 = forward after 8 seconds
2 = forward after 12 seconds
3 = forward after 16 seconds
4 = forward after 20 seconds
5 = forward after 24 seconds
6 = forward after 28 seconds
7 = forward after 32 seconds
Program the subscribers stations as needed
The Call Forward No Answer Timers purpose varies depending on which
software is used.
The following summarizes the Call Forward No Answer Timer differences
among CPC-A and CPC-B versions.
CPC Version
CPC-A
CPC-B Before 3.1
The above information is provided by Octel Communications Corporation as a guide.
C o n f i d e n t i a l
8 = forward after 36 seconds
9 = forward after 40 seconds
10 = forward after 44 seconds
11 = forward after 48 seconds
12 = forward after 52 seconds
13 = forward after 56 seconds
14 = forward after 60 seconds
15 = forward after 64 seconds
Timer Purpose
Controls Call Forward No Answer
and Hunt Group No Answer Ringing
Controls Call Forward No Answer,
Hunt Group No Answer, CO
Delayed Ringing, and Extension
See disclaimer on page 1
P a g e 9

Advertisement

Table of Contents
loading

Table of Contents