Page 2
Use Internet Explorer or Mozilla Firefox and go to location http://10.200.1.1. Connection method 2: Install the ABB IP Configuration Tool from the attached CD. When you start the program, it will search for connected SREA-01 modules. You can change the network settings of the module by double clicking it.
Page 3
Station id/number has to be unique for each drive! The baud rate selection and parity have to be same on all drives and SREA-01. You can use for example 9600 bit/s, no parity, 1 stop bit. 5. Basic SREA-01 settings You can change the Ethernet settings under Setup –...
Page 4
To search for connected drives, go to page Configuration – Devices and select autodetect. 6. More information For more detailed information, please refer to the SREA-01 User’s Manual located on the attached CD-ROM. SREA-01 Quick Start-up Guide Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...