Types Of Installation - Siemens SIMATIC NET Operating Instructions Manual

Mounting

5.2 Types of installation

5.2 Types of installation
Types of installation
You have the following options for the module:
● On a DIN rail
● With a mounting plate on a flat surface (wall mounting)
Requirements
Note the following before you mount a module:
● Install the device so that the climatic and mechanical limit values in the technical
specifications are adhered to.
● Make sure that there is adequate space to connect the bus and power supply cables.
● Connect the fiber-optic cables before mounting the modules.
This makes it easier to fit the fiber-optic cable.
● Mount the modules only on a rail or mounting plate that is grounded with low resistance
and inductance.
Beyond this, no other grounding measures are required.
36
Operating Instructions, 01/2020, C79000-G8976-C270-06
Optical link module