Technical Data - Siemens SIMATIC NET Operating Instructions Manual

Technical data

Properties
Power supply
Operating voltage
Current consumption
Output voltage for bus termination
RS-485 (D-sub female connector, pin 6)
Signaling contact
Function
Power
Current
Signal transmission
Transmission speed
Transmission speed setting
Bit error rate
Signal delay time (any input/output)
Retimer
Input (all channels)
Output (all channels) - average bit length
Status signaling
Device
Electrical channels
Optical channels
Optical level
Safety
IEC standard
UL approval
CSA approval
C-Tick approval
Optical link module
Operating Instructions, 01/2020, C79000-G8976-C270-06
OLM P11 V4.1
OLM P12 V4.1
OLM P22 V4.1
Signal distortion
Bit length
Device type
OLM G11 V4.0
OLM G12 V4.0
OLM G22 V4.0
OLM G12-EEC V4.0
24 VDC safety extra-low voltage
Permitted voltage range 18..32 VDC NEC Class 2
Max. 200 mA
5 VDC+5/-10%
Floating contact, opens if error/ fault occurs
CE: Max. 50 VDC/30 VAC safety extra-low voltage
cULus: Max. 30 VDC/30 VAC safety extra-low voltage
Max. 1.0 A
9.6; 19.2; 45.45; 93.75; 187.5; 500 kbps
1.5; 3; 6; 12 Mbps
Automatic
<10
≤ 6.5 t
± 30%
± 0,12%
± 0,01%
LED "System", red/green together with signaling contact
LED yellow/red
LED yellow/red
Level display with green/yellow/red LED
IEC 60950 (corresponds to EN 60950 and VDE 0805)
According to type plate
According to type plate
According to type plate
10
OLM G11-1300 V4.0
OLM G12-1300 V4.0
-9
Bit
73