Technical Specifications; Technical Data - Siemens SINUMERIK 840D sl Manual

Technical specifications

7.1

Technical data

Safety
Safety class
Degree of protection accord‐
ing to EN 60529
Approvals
Electrical data
Power consumption
(without load at USB interface,
without direct key module)
Mechanical data
Dimensions
Weight
Tightening torques, max.
Display
Size / resolution
Backlight-service life
Note
Information about the climatic and mechanical environmental conditions is contained in the
associated section under:
"General notes and interconnection" → "Operational planning".
Operator panel front: OP 012
Manual, 05/2019, A5E36371591B AB
III; PELV according to EN 50178
CE/cULus/EAC/KC/RCM
typically approx. 5 W
maximum approx. 6 W
Width: 483 mm
Tension jack screws:
0.5 Nm
12.1" TFT / 800 x 600 pixels
typ. 50,000 h at 25º C (dependent on the temperature)
Front side IP65
Rear side IP00
Height: 310 mm Depth: 30 mm
Approx. 5 kg
M3 screws:
0.8 Nm
7
M4 screws:
1.8 Nm
77