Siemens SINUMERIK 840D sl Manual page 29

Ethernet RJ45 interface X202
Connector type:
Max. data transmission rate:
Max. cable length:
Table 4-2
Note
Connection is only possible on an LAN, not on telecommunication networks.
I/O USB interface
All signals required for connecting operator panel fronts, with the exception of the display
interface, are assigned to this interface.
Associated interface cable:
Connector type:
Operator panel front: OP 012
Manual, 05/2019, A5E36371591B AB
Assignment of the Ethernet RJ45 interface 1000 Mbit/s
Connector Pin
1
2
3
4
5
6
7
8
Shield
-
-
Standard RJ45 socket
10/100/1000 Mbit/s
100 m
Name Type
DA+ B
DA-
DB+
DC+
DC-
DB-
DD+
DD-
- -
Green LED -
(right)
Orange LED -
(left)
K1
2 x 13-pin socket connector
4.1 Pin assignment of the interfaces
Remark
Bidirectional pair A+
Bidirectional pair A-
Bidirectional pair B+
Bidirectional pair C+
Bidirectional pair C-
Bidirectional pair B-
Bidirectional pair D+
Bidirectional pair D-
On connector housing
Illuminated orange: 1000 Mbps
Off: No or faulty connection
Illuminated: Data exchange
Off: No data exchange
Connecting
29