Huawei VCN520 Quick Start Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Hardware
  5. VCN520
  6. Quick start manual

Huawei VCN520 Quick Start Manual

Video cloud node
Hide thumbs

Advertisement

Table of Contents

VCN520&
VCN540
V100R002C30
Video Cloud Node
Quick Start
Adresse IP/nom d'utilisateur/mot de passe de connexion par défaut du client C/S:
URL/nom d'utilisateur/mot de passe de connexion par défaut du portail OMU:
Default login IP/user name/password of the C/S client:
IP accesso predefinito/nome utente/password C/S client:
Default login URL/user name/password of the OMU Portal:
URL accesso predefinito/nome utente/password Portale OMU:
https://192.168.2.101:8443/Admin/Change_Me
Copyright © Huawei Technologies Co., Ltd. 2019 All rights reserved.
192.168.2.101/Admin/Change_Me
Issue: 02
BOM: 31508624

Advertisement

Table of Contents
loading

Related Manuals for Huawei VCN520

Summary of Contents for Huawei VCN520

  • Page 1 Default login URL/user name/password of the OMU Portal: URL/nom d'utilisateur/mot de passe de connexion par défaut du portail OMU: URL accesso predefinito/nome utente/password Portale OMU: https://192.168.2.101:8443/Admin/Change_Me Copyright © Huawei Technologies Co., Ltd. 2019 All rights reserved. Issue: 02 BOM: 31508624...

  • Page 2: Safety Precautions

    Qualification Card 1.Safety Precautions WARNING: Do not touch the connectors of the power cable or communication cable. Otherwise, you will be injured by the electric shock caused by the current flow. Wear an electrostatic discharge (ESD) gloves or wrist strap and antistatic clothing when performing operations on the device.
  • Page 3 2.VCN520/VCN540 At-a-Glance Huawei VCN520/VCN540 is integrated intelligent video surveillance products that provide a wide range of services including live video viewing, video retrieval, video playback, alarm linkage, pan-tilt-zoom (PTZ) control, voice intercom, and electronic map. Huawei VCN520/VCN540 delivers secure, efficient, and purpose-built video surveillance solutions for government agencies, transportation departments, educational institutions, and enterprises of all sizes.

  • Page 4: Packing List

    Note: The VCN520 or VCN540 has two USB interfaces: USB2.0 and USB3.0 interfaces. Both USB interfaces can connect to USB flash drives and USB mice. However, the USB3.0 can connect to removable hard disks while the USB2.0 cannot.

  • Page 5: Device Installation

    After the VCN520 or VCN540 is delivered to the site, disk filler panels are installed in slots where disks are not installed, by default. You are not advised to remove the filler panels from the slots where disks are not installed, because removing the filler panels will affect the heat dissipation of fans and generate some noises.

  • Page 6: Cabinet Installation

    5.3 Cabinet Installation Note: Before installing the VCN520 or VCN540 in the cabinet, install the mapping guide rail to bear the device. If a guide rail has been installed in the cabinet, check whether the guide rail matches the device. The device is equipped with right-to-left airflow. Therefore, check whether the guide rail may block the air exhaust vent.
  • Page 7 Install the filler panel of the guide rail. Install the M6 screws used to fix the filler panel of the guide rail, as shown in the following figure. Install the floating nuts used to fix the VCN520/VCN540. The floating nuts are installed in the first and sixth holes along the guide rail from bottom to up.
  • Page 8 When multiple VCN520s or VCN540s are deployed, a guide rail needs to be installed for each device. A VCN520 or VCN540 requires 2 U space. A guide rail requires 1 U space. Therefore, installing a single device requires a total of 3 U space. Before installing devices, properly plan the cabinet space.

  • Page 9: Connecting Cables

    To use the alarm linkage function, connect the LDU to an alarm input device and an alarm output device. Huawei VCN520/VCN540 is not delivered with peripheral devices, users can purchase these peripheral devices as required.
  • Page 10 Note: If users do not need to externally connect alarm input or output devices temporarily, it is recom- mended that the Phoenix connectors be inserted into the alarm input and output ports to pre- vent Phoenix connector losses. Insert one end of the power cable to the power supply interface of the device and the other end to the power outlet.

  • Page 11: Powering On The Device

    7.1 Powering on VCN520 Turn on the power switch of VCN520, as shown in the following figure. After the device is powered on, you can check the indicator status on the front panel of the device to know the device running status and determine whether each system module is running properly.
  • Page 12 7.2 Powering on VCN540 Turn on the power switch of VCN540, as shown in the following figure. After the device is powered on, you can check the indicator status on the front panel of the device to know the device running status and determine whether each system module is running properly. The following describes the indicators: Indicator Status Description...

  • Page 13: Open Source Software Notice

    For details about configuration, see the Configuration Guide in the VCN510&VCN520&VCN540 V100R002C30 product documentation. 10.Obtaining the Technical Support If you purchased the device from Huawei, obtain the technical support in either of the following ways: - In China: Dial the hotline 400-822-9999 for device maintenance.
  • Page 14 12.Declaration on Hazardous Substances in Electronic and Electrical Products Hazardous Substance Component Cr(VI) PBBs PBDEs Ｏ Ｏ Ｏ Ｏ Ｏ Alloy parts Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ Metal fittings Cables Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ Ｏ...

  • Page 15: Warranty Card

    90 days after shipment, the warranty automatically starts on the 90th day after shipment. Notes: 1. When you purchase a product from Huawei, please confirm the date when the product will be shipped from Huawei, and check other warranty-related information.

This manual is also suitable for:

Vcn540

Table of Contents