Software - Husqvarna Automower 310 Technical Manual

1.5 Software

The behaviour of the robotic lawnmower is controlled by
microprocessors and software. There is an MSW program
(Main SoftWare), an HMI program (Human Machine
Interface) and a SSW program (Subsystem SoftWare).
The main program (MSW) interprets the signals from the
sensors and controls the operation accordingly.
The HMI program checks the presentation of information
in the display and the inputting of, for example, keystrokes
on the keypad. The HMI program contains the texts that
are shown in the display.
The SSW program controls the blade motor, among other
functions.
This Technical Manual covers versions 6.00.00 of the main
program and 6.00.00 of the HMI program.
1.5.1 Ascertaining the program version
1. Set the main switch to position 1.
2. When the start page is displayed: Keep the 0 key
pressed in for two seconds to go to Quick Check.
3. Select Info and press OK.
4. Select General and press OK.
5. The main program's version is indicated on the
line that starts Main : e.g. 6.00.00. The HMI
program's version is indicated on the line that
starts HMI : e.g. 6.00.00. The SSW program's
version is indicated on the line that starts SSW :
e.g. 6.00.00.
6. Hold down the BACK button for two seconds
to exit Quick Check and return to the main menu.
It is important that the robotic lawnmower is
programmed with the latest software versions.
The Husqvarna is continuously improving the
mower's behaviour and performance, which
results in new software versions.
English - 10
TH_1158203_310_315_GARDENA_US.indd 10
1. FUNCTION
Software type
Main
HMI
SSW
SW Prod.
315
6.00.00
6.00.00
6.00.00
2016-05-11 10:15:53