Husqvarna Automower 310 Technical Manual page 29

2.7.2 History, total
You can use the values shown in this sub-menu
to determine how well the mower has been working.
When a value deviates from the norm, this may be
due to an installation defect or a fault in the mower.
The sub-menu consists of four part-menus that
together provide a good picture of the mower's
function.
Key data
The Key data sub-menu shows:
• Total running
Running time is defined as the accumulated
time in hours that the wheel motors have
been working. This means the time when the
robotic lawnmower is running without mowing
is also included in the running time. The time
stated here is the time stated on the start
page.
• Total mowing
Mowing time is defined as the accumulated
time in hours that the blade motor has been
working.
• Total search time
Search time is defined as the accumulated
time in hours that the mower has been in
search mode, in other words the time from
starting to search for the charging station until
it has docked. The time for searching varies
depending on how large the working area is
and what the installation is like. You should
aim at as low a value for searching as possible
Depending on the installation it is normal that
the mower searches for between 10 - 20%
of the total running time.
• Total charging time
Charging time is defined as the accumulated
time in hours that it has taken to charge the
battery.
• Complete chargings
Counts number of complete chargings.
A complete charging is defined as a charging
that has proceeded for more than 20 minutes
and that has been terminated as the charge
current is less than 0.3 A.
Search times
Information about how long a search for the charging
station has taken. The list shown contains the times
of the last 12 search occurrences measured in minutes.
TH_1158203_310_315_GARDENA_US.indd 29
2. SPECIAL MENU FUNCTIONS
Key data
Info
Search times
History, total
Mow times
History, trip
Battery capacity
Test
Special settings
Calibrate
English - 29
2016-05-11 10:16:06