Advertisement
•
For BG 375 (H5-BC): Loosen the locking knob, move
the handle up or down to an applicable height and
tighten the locking knob.
•
For BG 375 (H6-BC, H9-BC) and BG 475: Loosen
the lower locking knob, move the handle up or down
to an applicable height and tighten the lower locking
knob.
To install the floating disc (BG 245,
BG 375)
1. Put the floating disc on a hard flat surface.
2. Put the product on top of the floating disc.
3. Align the center of the blade assembly with the
center of the floating disc.
4. Turn the floating disc until the blades engage in the
brackets on the floating disc.
CAUTION: Make sure that the floating
disc is correctly installed before you
operate the product. An incorrectly
installed floating disc does not give a
smooth result.
1071 - 001 - 11.12.2019
To start the product
1. Open the fuel valve.
2. Set the throttle control to idle speed.
3. Set the choke control in the correct position.
a) If the engine is cold, close the choke.
b) If the engine is warm or the ambient temperature
is high, open the choke.
4. Set the engine ON/OFF switch to "ON".
9
Advertisement
