Safety Instructions - Silvercrest SHTT 2200 B1 Operating Instructions Manual

Safety instructions

RISK OF ELECTRIC SHOCK
Connect the hairdryer only to a correctly installed mains power
►
socket providing electrical current at the level detailed on the
rating plate .
Under no circumstances may the hairdryer be submerged in
►
liquids, or liquids be permitted to enter the appliance housing .
Do not expose the appliance to humidity and do not use it
outdoors . If liquid gets into the housing, disconnect the
appliance from the mains power socket immediately and
have it repaired by a qualified technician .
Unplug the hairdryer from the power socket if defective opera-
►
tion is apparent and before cleaning it .
To disconnect the appliance, pull only on the plug itself, not
►
on the power cable .
Do not wrap the power cable around the appliance and
►
protect the cable from being damaged .
To avoid potential risks, damaged mains cables should be
►
replaced by the manufacturer or the manufacturer's customer
service department or a similarly qualified person .
Do not kink or crush the power cable and route it in such a
►
way as to prevent people from stepping on or tripping over it .
Do not use extension cables .
►
Never touch the hairdryer, the power cable or the plug with
►
wet hands .
Disconnect the hairdryer from the power source immediately
►
after use . The appliance is completely free of electrical
power only when you unplug it .
You must not open or repair the housing of the hairdryer .
►
Doing so can lead to risks and also invalidates the warranty .
Arrange for the hairdryer to be serviced and repaired only
by qualified specialists .
■ 40 │ GB │ MT SHTT 2200 B1