Network Client Mode Communication Test; Xdcam Air - Sony CBK-WA100 Setup Manual

5.6. Network Client Mode Communication Test

After the network communication test is successful, the next step is to test Network Client Mode.
1 Select Settings > Network Client Mode Settings, and select Preset in the drop-down list.
Note
The display name "XDCAM air" of Preset 1 is used as an example.

5.6.1. XDCAM air

1
Select System Settings > Network Client Mode Settings in the web menu, the set Network Client to On
and tap the OK button.
2 Start communication with the CCM of XDCAM air.
When XDCAM air is accessed for the first time from a device, you must activate the device after
connecting to the CCM of XDCAM air.
The Network Client Mode status displays "Connecting" and then "Connected" together with the CCM
name. Check the CCM UI of XDCAM air.
31