Network Client Mode - Sony CBK-WA100 Setup Manual

12.2. Network Client Mode

Problem: Cannot connect to CCM
Display or Message
NCM icon is not displayed on the
camcorder LCD panel.
"Connecting" is displayed for
Network Client of Device Status
in CBK-WA100/101 web menu.
NCM icon is not displayed on the
camcorder LCD panel.
Status LED is flashing orange.
"Authentication Failed" is
displayed for Network Client of
Device Status in the
CBKHWA100/101 web menu.
NCM icon is not displayed on the
camcorder LCD panel.
Status LED is flashing orange.
"Certificate has expired" is
displayed for Network Client of
Device Status in the
CBKHWA100/101 web menu.
NCM icon is not displayed on the
camcorder LCD panel.
"Certificate is not yet valid" is
displayed for Network Client of
Device Status in the
CBKHWA100/101 web menu.
NCM icon is not displayed on the
camcorder LCD panel.
"Destination Address Error" is
displayed for Network Client of
Device Status in the
CBKHWA100/101 web menu.
NCM icon is not displayed on the
camcorder LCD panel.
"No Internet Access" is displayed
for Network Client of Device
Status in the CBK-WA100/101
web menu.
NCM icon is not displayed
Reason & Solution
The CBK-WA100/101 has not been activated from the CCM UI of XDCAM air.
Check the CCM UI whether Settings > Resource > Transmitter > TX setting is set to
Pending. If it is set to Pending, change the setting to Registered.
Camera license count "Used" has reached "Total".
Check Settings > Resource > Transmitter in the CCM UI.
NCM settings are incorrect.
Check the following settings: URL of CCM, IP address of CCM, Port number, and other
"5.4. Network Client Mode Settings"
settings (see
"12.1. Network"
setting is correct (see
Network is not working properly.
Check the network settings (see
CBK-WA100/101 firmware version does not match with Network RX Station.
Check the CBK-WA100/101 firmware version and Network RX Station firmware version
"5.4.1. Connection Compatibility"
(see
User or Password setting is incorrect (see
"5.4. Network Client Mode Settings"
Date is incorrect (see
"5.4. Network Client Mode Settings"
Date is incorrect (see
Cannot obtain IP Address from DNS.
Check that the CCM address is correct (see
Check that the DNS server setting is correct (see
Current network environment is not connected to the Internet.
Check network condition (see
Network Client Mode is not working
Check Settings > System Settings > Network Client Mode Settings in the web menu.
Wireless status icon indicator is not displayed.
Check that OPERATION > Display On/Off > Wireless Status in the setup menu is set to
On.
). Also check that the DNS server
).
"12.1. Network"
).
).
"5.4. Network Client Mode Settings"
"5.4. Network Client Mode Settings"
"12.1. Network"
"12.1. Network"
).
47
).
).
).
).
).