9
Chapter
9.1. Camcorder Settings
For setting file names using planning metadata, the following settings must be configured.
Select Operation > Clip > in the setup menu, and set Auto Naming to Plan.
Select Operation > Clip > in the setup menu, and set Name Display to On.
Note
If Proxy Recording Size is set to "HD/SD Auto (9M/6Mbps), proxy recording cannot be started after the
Network Client Mode setting is set to On.
9.2. Planning Metadata Handling Test
After communication with the CCM using Network Client Mode is successful, planning metadata files can
be downloaded using the CCM UI.
When a planning metadata file is downloaded to your camcorder, clip names change to the content of the
Title element of the planning metadata file.
Example
• Clip Naming is set to "Title".
• Title is "995" and numeric suffix is 0003
(4 digits).
If the Title element contains characters which cannot be used in file names, the characters are replaced by
"_" (underscore) characters.
The following characters cannot be used in file names:
\ / : * ? " < > |
For example, if the Title element is "TodayNews<123>", clip names will be "TodayNews_123_" + numeric
suffix.
Setup for "File Naming using Planning Metadata"
• Clip Naming is set to "Plan" and planning
metadata is loaded.
• Content of Title element in planning metadata
is "TodayNews" and numeric suffix is 00001
(5 digits).
38