Toro Groundsmaster 7210 Series Operator's Manual page 34

Parked or Recovery Regeneration
•
When the engine computer requests either a
parked regeneration or a recovery regeneration,
the regeneration request icon
in the InfoCenter.
Figure 43
•
The machine does not automatically perform a
parked regeneration or a recovery regeneration,
you must run the regeneration through the
InfoCenter.
Parked Regeneration Messages
When a parked regeneration is requested by the
engine computer the following messages display in
the InfoCenter:
•
Engine warning SPN 3720, FMI 16
Figure 44
•
Parked regeneration required A
(Figure 45)
Note:
Advisory #188 displays every 15 minutes.
Figure 45
(Figure 43) displays
g224404
(Figure 44)
g213863
#188
DVISORY
g224397
34
Recovery Regeneration Messages
When a recovery regeneration is requested by the
engine computer, the following messages display in
the InfoCenter:
•
Engine warning SPN 3719, FMI 0
Figure 46
•
Recovery regeneration required—power takeoff
disabled A
DVISORY
Figure 47
DPF Status-Limitation
•
If the engine computer requests a recovery
regeneration or is processing a recovery
regeneration and you scroll down to the P
R option, parked regeneration locks and the
EGEN
lock icon (Figure 48) appears in the lower right
corner of the InfoCenter.
Figure 48
•
If the engine computer has not requested a
recovery regeneration and you scroll down
to the R R
ECOVERY
regeneration locks and the lock icon
appears in the lower right corner of the InfoCenter.
(Figure
#191 (Figure 47)
option, the recovery
EGEN
(Figure
46)
g213867
g243798
ARKED
g224625
49)