Adjusting The Roll Bar - Toro Groundsmaster 7210 Series Operator's Manual

Adjusting the Roll Bar

WARNING
To avoid injury or death from rollover, keep
the roll bar in the raised locked position and
use the seat belt.
Ensure that the seat is secured with the seat
latch.
WARNING
There is no rollover protection when the roll
bar is in the down position.
• Do not operate the machine on uneven
ground or on a hill side with the roll bar in
the down position.
• Lower the roll bar only when absolutely
necessary.
• Do not wear the seat belt when the roll bar
is in the down position.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance
permits.
• Check carefully for overhead clearances
(i.e., branches, doorways, electrical wires)
before driving under any objects and do
not contact them.
Important:
Always use the seat belt when the
roll bar is in the raised and locked position. Do
not use the seat belt when the roll bar is in the
lowered position.
Lowering the Roll Bar
Lower the roll bar as shown in
Note:
Push the bar forward to relieve pressure on
the pins.
Figure 12.
Note:
Secure the roll bar so that it does not damage
the hood.
17
Figure 11
g031636
g031635