Silvercrest KH 2525 Operating Instructions Manual page 51

Setting up and connecting
Disposal of the packaging
The packaging protects the device from transport damage. The packaging materials
are selected from the point of view of their environmental friendliness and disposal
technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces generated waste. Dispose of packaging material that is no longer needed
according to the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that in the case of a warranty claim you can package the device
properly for return.
Requirements for the setup location
For safe and trouble free operation of the device the setup location must fulfi ll the
following provisions:
■ The transmission unit and the speakers must be placed on a fi rm, fl at, level
surface.
■ Do not place the device in a hot, wet or very damp environment or in the vicinity
of fl ammable materials.
■ The mains power socket must be easily accessible so that the power adapter
can be easily disconnected in an emergency.
Connecting the mains adapter
Observe the following electrical connection for safe and failure free operation of
the device:
■ Before connecting the power adapter
(voltage and frequency) with that on the rating plate of your electric supply.
This data must agree in order to avoid damaging the device.
■ Make sure that the power adapter's
is not laying over hot surfaces and/or sharp edges.
■ The power adapter's
Plug the connection cable into the DC IN
power adapter
Loudspeaker System KH 2525
connection cable is not damaged and
17
connection cable must not be stretched too tight.
17
into a mains power socket.
17
compare the connection data
17
connection and then plug the
11
GB
53