Page 1
(Household) Massage Lounger 型号 EP-MA32 Model No. 简体中文 English 感谢您购买本Panasonic产品。 使用本产品之前, 请仔细阅读本说明书, 并妥善保存以供未来使用。 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use. 扫描二维码 关注松下服务官方微信平台 在线人工客服 一键报修报装 服务进度查询 获取新品资讯...
Page 43
Contents Page Befor Use Important safety instructions............EN4 Names and functions of parts ............. EN8 Names and functions of remote controller ........EN10 Setup of the massage lounger............EN12 Assembly ..................EN14 Before use ..................EN16 Adjustment of backrest angle and Leg/Foot massage section angle ... EN20 How to Use Select the massage program and begin for massage ......
Important safety instructions Always follow these instructions This section contains instructions that you must follow to prevent personal injury or damage to property. ■ The instructions are classified according to the level of injury or damage that may occur due to the mistaken use of this unit. Please ensure that you read all instructions before using the Household Massage Lounger.
Page 45
■ Instructions that you must follow are indicated using the following symbols. (The following symbols are examples.) Denotes a specific operating procedure that must Denotes a specific operating procedure that must be not be performed. performed. When in use When massaging the neck area, be careful of ...
Page 46
Important safety instructions (Continued) WARNING Power plug, power cord etc Symptoms Do not do anything that may damage Persons who are otherwise healthy but have any of the the power cord or power plug. conditions listed below should consult with their physicians before using the unit.
Page 47
CAUTION Before and during use Do not use the massage heads on your head, Check that the massage heads are in the retracted position. (EN18) stomach or bare skin. Also, do not place your hands or feet between the massage heads. ...
Names and functions of parts Back cushion Shoulder massage section Including built-in air bags for massage. The fabrics of traveling sections of the massage wheels on the backrest Remote controller EN10 to EN11 ●Massage wheels: → Including built-in massage wheels. →...
Page 49
Back cover Remote controller holder Remote controller stand Handle (for handling) Rating label Foot cover Wheels Protective fabric covering Power line Protective fabric Power plug covering Power switch Safety lock switch Power switch Safety lock key Safety lock key label Avoid swallowing by a child.
Names and functions of remote controller Remote controller The figure shows the condition when all the lights remain lit. ● ■ ■ ON/OFF button Air intensity adjustment button ▶EN31 For connecting or disconnecting the power supply. ● ■ ■ Menu selection button Back massage intensity ▶EN21 to EN32 adjustment button...
Page 51
Display The figure shows the condition when all the lights remain lit. ● Display of the massaged part Display of air bag The current rough massage The currently selected air bag massage position flickers. movement light remains lit. The current air bag massage position flickers. ■...
Setup of the massage lounger Before use (installation position) Keep the product 20 cm from the wall. Approx. 195 cm Approx. 30 cm Make sure there is enough space for the tilting of the product. See EN40 for dimensions of the product. ●...
Page 53
Take out all the items in the packing list and install them on the main body The product is heavy and should be ● handled carefully by two persons at least to avoid back strain. Product weight Approx. 83 k g Raise the Hold front of the leather and put...
Assembly Install the remote controller holder on right side of the product Install the remote controller holder and put the remote controller into it. ❶ Insert the remote controller holder into the remote controller stand till the end. ❷ Fix with the remote controller holder retaining screw.
Page 55
Connect the power supply and raise the backrest Do not put the back cushion between the backrest and ❶ the back cover or handle the product when holding its window frame. Make sure there is no foreign matter between the backrest and the back cover. ❶...
Before use Check the space around the product Make sure there is no person, pet or other object close to the product. Roll up the back cushion and fix it by the hasp Back cushion Roll up the back cushion and fix it on the main body by the hasp.
Page 57
Inspect the power line and power plug WARNING Dust the power plug on a regular basis. • Remove dust using a dry cloth. (Otherwise it may lead to fire, due to damp shorting the insulation.) Do not do anything that may damage the power cord or power plug.
Page 58
Before use (Continued) Make sure the massage wheels are retracted Check If they are not, press twice to return them to the retracting position. Make sure the fabric is not damaged nor cracked Inspected area: The fabric of traveling sections of the massage wheels on the backrest WARNING Always check the fabric covering the backrest...
Page 59
Adjust the angle of the remote controller Adjustment of remote controller Left-right adjustment. ● Left/Right Adjust length of the Leg/Foot massage section as needed For a tall man Adjust the length of sliding in the foot massage ● section and your knees will not lift too high. Push the Leg/Foot massage section by feet.
Adjustment of backrest angle and Leg/Foot massage section angle ① Before massaging or using tilting function of the backrest or the Leg/Foot massage section, make sure all parts of the product are normal. See EN16 to EN19. ② After use, act as instructed in the “After massage” section in EN33.
Select the massage program and begin for massage WARNING Select a gentle “揉抚放松” massage when using for the first time. Do not massage for more than 15 minutes each time. Each body part should be massaged 5 minutes or less. (Otherwise it may lead to adverse effect or injury.) Take a break for about 10 minutes after using 15 minutes.
Select the Automatic Programs massage mode After is pressed, the product [Program selection mode] will enter the corresponding program selection mode. (If there is no operation in three minutes in the program selection mode, the power supply will be disconnected automatically.) ❶...
Page 63
❷ After selecting the program, press . The product will When there is a beep and the sign be automatically adjusted to on the LCD of the remote controller the massage position. is flickering, the massage wheels Inclination angle: About 18° may be adjusted to the shoulders.
Page 64
Select the Automatic Programs massage mode (Continued) Method to change the massage program: When the program is started, lean your head on the backrest. When you want to select another program among the Automatic Programs: Before the shoulder ● position is determined, Press and select as keep leaning the head on...
General contents of massage programs General contents of Automatic Programs (representative massage movements of the automatic programs) Knead the whole Forcefully knead the Stretch the shoulders. Forcefully knead the Stretch the legs and the Forcefully knead the Forcefully knead the Finally, knead the back.
Select the Random program for massage [Massage method selection mode] After is pressed, the massage modes and methods can be customized. (If there is no operation in three minutes in the massage method selection mode, the power supply will be disconnected automatically.) Basic massage (when only one massage method is selected) ❶...
Page 67
Combination of multiple massage methods Set as you like [Example] Combination of Kneading (Upward Kneading), Beat (Quick Beat) and Stretch (Partial Stretch). EN31 ① Select Kneading from the massage modes through ▲ or ▼. Method to change the massage mode ②...
Page 68
Select the Random program for massage (Continued) Contents of massage modes (the illustrations below are schematic diagrams of the massage methods) Neck manipulation Waist manipulation Kneadi n g by means of i n ward or outward rol l i n g of the massage wheel s Movement of neck manipulation Movement of waist manipulation Movement of forceful pressing...
Select Air Bag/Stretch for massage After Air Bag/Stretch is pressed, the [Movement and part selection mode] product will switch to the movement and part selection mode. (If there is no operation in three minutes in the movement and part selection mode, the power supply will be disconnected automatically.) ❶...
Page 70
Select Air Bag/Stretch for massage (Continued) Movement of Air Bag massage Pelvises Clamp the waist sidelong and impose pressure on the hip along the down-up direction. Lower legs Clamp the lower legs from their two sides and backs and squeeze them. Ankles Wrap the ankles and squeeze them.
Set as you like Operation ▲▼(Massage wheel) ◀▶(Massage wheel) Movement During running The parts needing no Air The air bag The back massage Each time after Dual-temperature is The shoulder of the Automatic Bag/Stretch massage intensity can be intensity can be pressed, the back warm massage position can be —...
Page 72
Set as you like (Continued) Adjustment of massage wheels Up-down adjustment of a massage wheel Method to adjust distance adjustment of the massage wheels Adjust through ▲ or ▼ Applicable to massage modes including Neck Manipulation, Waist Each time after either button is ●...
After massage ❶ ❸ Make the Leg/Foot massage Power off the product. section slide back to its original position. To reset the foot ② massage section, just ① raise the feet a little. ① Turn off the power WARNING switch. ②...
Cleaning and maintenance Cleaning of the synthetic leather Wipe the synthetic leather with a soft dry cloth. water mild detergent Do not clean the product with chemicals such as thinners, ● gasoline and alcohol. When using a leather maintenance product (cleaning cloth) ●...
Questions and answers (Q&A) Can persons paying frequent visits Where is serial number of the to hospitals because of diseases product? use the product? It is below the seat surface on back These persons should consult of the main body. physicians before using the product.
Page 76
Questions and answers (Q&A) (Continued) Are there any things needing special attention during moving? Pay attention to the following things during moving. For convenience during moving, tilt backrest of the ● product till the lowest position. During handling, do not sit on the product. ●...
Troubleshooting After a fault happens, inspect and try the corresponding method below. If the fault still exists after that, contact the authorized service center from which you bought the product. Fault Cause and elimination method For safety, the massage wheels will possibly stop upon a too larger external force during use.
Page 78
Troubleshooting (Continued) The sounds and feelings you care about in use of the product You will hear or have the following sounds or feelings when using the product. It is not abnormal phenomena but results of the product structure. Sound when the stretching massages are retracted ●...
Page 79
Fault display In the case of any fault in use, its content will be displayed in the position for displaying the time left. If the fault content is , the , and light will be lit successively. ● Fault display Content ▶...
Specifications Power supply AC 220 V 50 Hz 145 W Rated power (Approx. 0.3 W when the remote control is OFF) Range of massage Approx. 62 cm (up-down direction) Massage wheel spacing (including massage wheel width) during use of the product Range of the massage neck, should, back and waist: Approx.